Kinghitter Side mounted Post Driver

Condition: New

Make: King Hitter

The Kinghitter Series 2i post driver makes fencing quick and easy in all conditions. Over 40 years of daily use by fencing contractors has refined and reduced every operator movement required to accurately place and install fence posts efficiently. The guide wire of a new fence line, or existing fence you are repairing are conveniently located at the right-hand side of the tractor. This means unobstructed access off the left side of the tractor, with a safe and convenient working position facing the direction of travel.

All functions are lever controlled, giving smooth and accurate operation. The Terminator Side mount has 950mm of travel, so you can reach well out past the tractor into hard-to-reach places. It also has a large toolbox and locations for your level, spade, hand rammer, and wire unwinder.

The mast can reach angles of 20 degrees in all directions, so you can get all posts vertical, regardless of the terrain. The fast cycle times and unrestricted free fall of the hammer ensures any fence post is installed in the minimum of time. The S2i 360 can install up to 2.7m (8’ 10”) wooden posts.

Specifications

Mast 3.6m 150UC
Max Post Height 2.7m (8’ 10”)
Toplink Hydraulic with 20 Degrees Fore/Aft Angle
Side Tilt Hydraulic With 20 Degrees Left/Right Angle
Safety Postcap 25mm with guard and rubber mat
Hammer Weight 230 kg (500lb)
Legs Height adjustable