Coolroom 15m X 11m X 5.1m (Cheese Room)

Condition: Used

Approx. 24m x 11m x 5.1mH EPS 150 ml Panels 150mm thick EPS fire retardant panel. (Minimum thickness of panel required for Coolroom running at -4C to 0C is150mm)
Designed with two independent systems with one condensing unit and one evaporator coil in each system. The two systems are controlled by the one digital control.
The equipment has been designed for heavy use and also designed with electronic valves for energy saving (save running costs up to 20% per year and more efficient with handling product loads).
Designed for all products to be entering the room at – 1 degrees or below, its designed to run at -3 degrees.
2x Condenser Unit – Enthalpy TD Semi-Hermetic (12HP) Total cooling capacity
21400watts each unit
2x Evaporator coil – Buffalo low temp series ( 2x 500mm fans per evaporator coil)
Pipe / Insulex (30 meters of main pipe work allowed for each system )
Pipe clamps (liquid and suction lines e clamped no further then 2 meters apart on unistrut)
Refrigerant R404a
1x Digital Controller (with 4 sensor in the room)
Electronic valve (energy saving 20% per year)
PVC Drain
Drain Heater
Commission system
Refrigeration system has been maintained with frequent and regular servicing to keep consistent and reliable temperature and is in perfect working order
Buyer to organise removal but can get quotes from original installer.
For a New installation of the same quoted at $80K.
NOTE: Pallet racking can go with Coolroom but will be at an extra cost. POA.