$12,000.00 + GST($13,200.00 Inc. GST)
- Condition: Used
- Make: Elsworth
The 4’ model will feed any 4’ wide bale, 4’ high to 6’ high.
The twin bale feeder can feed out silage through to tight oaten rolls.
The twin bale feeder has a heavy duty construction from Australian steel.
The chassis is made from 125mm x 75mm x 6mm RHS.
A flat floor enables tight silage/oaten rolls to easily unroll and start feeding out.
The deep 20” chamber prevents rolls from coming out of the feeder when feeding on hilly terrain.
Feeder shafts are 11/2 shaft with heavy duty 12mm sprockets.
Feed bars are made from 50mm x 50mm x 8mm angle iron with heavy duty 16mm pins to tear out the hay.
The hydraulic motor is a high quality motor, USA White
Two bales can be carried, one in the chamber and one on the hinging spears.
The axles are three tonne capacity with slimline landcruiser hubs.
Feeder chain is 3” long link 6000lb conveyor chain made in Australia, bars are bolted on not welded to chain.
The Standard twin bale feeder comes with dual hoses, but an isolator valve is available at no extra charge for tractors with single remotes.
Comes with mudguards and rear tail lights
Autumn Special $12,100 inc gst
Available powerpacks - 13hp Honda