Sheep Feeder & Sheep Feeder Filler (Unfinished Project)

Make: Custom Made

<p>Tandem trailer front axle braked 31X10.50R15LT tyres </p><p>Honda GX670 24hp V Twin motor with two hydraulic pumps mounted</p><p>One to drive the two cross augers mounted internally from front to back each has own hydraulic motor</p><p>The other to drive the 145mm X 2950mm unloading auger  The three hydraulic motors are included</p><p>Electric controlled hydraulic valves mounted on front of bin with fuel tank and 90 litre oil tank</p><p>The auger hopper (internal) at the back has a linear actuator controlled sliding trapdoor for trail feeding</p><p>Rear door opens and lift off.. Was thinking of feeding out large square hay bales but don’t know if this would work</p><p>Rinstrum 2100 display and load bars weighing system</p><p>Rear lights wired in</p><p>Bin size approx. 2850 mm long 1200mm high and 1700 wide halfway up sides approx. 5.5 cubic meters</p>